TOP CATEGORIES
SALE PRODUCTS
1.25G CWDM SFP
Connlight 155M~ 2.67G CWDM&DWDM SFP contain 155Mb, 622Mb, 1.25Gb, 2.5G series, support a variety of transmission distance from 40KM to 160KM. The series products adopt LC optical port and are compatible with ieee 802.3ba.It is characterized by low power consumption, small volume and wide temperature range.It is mainly used in SDH/SONET transmission and other environments.
1.25G DWDM SFP
Connlight 155M~ 2.67G CWDM&DWDM SFP contain 155Mb, 622Mb, 1.25Gb, 2.5G series, support a variety of transmission distance from 40KM to 160KM. The series products adopt LC optical port and are compatible with ieee 802.3ba.It is characterized by low power consumption, small volume and wide temperature range.It is mainly used in SDH/SONET transmission and other environments.
1.25G SFP
The Connlight data rate range of 155M~ 2.67G SFP optical transceiver includes 155MB /s, 1.25Gb/s and 2.5Gb/s series. Support a variety of transmission distance from 500m to 120km, the series of optical transceiver use LC optical interface, with low power consumption, small size, high reliability, wide temperature range and other characteristics. It is mainly used in Ethernet/SDH/SONET/FC transmission environment.
100G BiDi QSFP28
The 100GBASE-SR Bi-Directional QSFP28 transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF). It offers customers a compelling solution that enables reuse of their existing 10 Gb duplex MMF infrastructure for migration to 100 Gigabit Ethernet connectivity. This transceiver is compliant with the QSFP28 MSA and IEEE 802.3bm CAUI-4 electrical interface. Digital diagnostics functions are also available via an I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters.
SPECIAL OFFER
Arista
Cisco
Dell
+3
HPE Aruba
Intel
Juniper
FOR TRAVELERS
Arista
Cisco
Dell
+3
HPE Aruba
Intel
Juniper
SALE PRODUCTS
1.25G SFP
The Connlight data rate range of 155M~ 2.67G SFP optical transceiver includes 155MB /s, 1.25Gb/s and 2.5Gb/s series. Support a variety of transmission distance from 500m to 120km, the series of optical transceiver use LC optical interface, with low power consumption, small size, high reliability, wide temperature range and other characteristics. It is mainly used in Ethernet/SDH/SONET/FC transmission environment.
1.25G CWDM SFP
Connlight 155M~ 2.67G CWDM&DWDM SFP contain 155Mb, 622Mb, 1.25Gb, 2.5G series, support a variety of transmission distance from 40KM to 160KM. The series products adopt LC optical port and are compatible with ieee 802.3ba.It is characterized by low power consumption, small volume and wide temperature range.It is mainly used in SDH/SONET transmission and other environments.
FAVORITE GARDEN
Many desktop publishing and
web page editors now.
web page editors now.
ALL FOR GARDEN
100G BiDi QSFP28
The 100GBASE-SR Bi-Directional QSFP28 transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF). It offers customers a compelling solution that enables reuse of their existing 10 Gb duplex MMF infrastructure for migration to 100 Gigabit Ethernet connectivity. This transceiver is compliant with the QSFP28 MSA and IEEE 802.3bm CAUI-4 electrical interface. Digital diagnostics functions are also available via an I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters.
25G SFP28 DAC
Connlight 25G SFP28 PCC is a portfolio of passive Direct Attach Copper (DAC) cables as high-speed, cost-effective alternatives to fiber optics in 25G Ethernet applications. The 25G SFP28 PCC cable contains 2 high-speed copper pairs, operating at data rates of up to 25Gb/s. Each SFP28 port comprises an EEPROM providing product information, which can be read by the host system. Connlight's unique quality Passive Copper Cable (PCC) solutions provide power-efficient connectivity for short-distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers. Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.
PLC Splitter
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE and GR-1221-CORE requirements.
Arista
Cisco
Dell
+3
HPE Aruba
Intel
Juniper
40G QSFP+ AOC
Connlight QSFP+ Active Optic Cables are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP+ MSA and IEEE P802.3ba 40GBASE-SR4. The QSFP+ AOC is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s. These AOCs can be used as an alternative solution to QSFP+ passive and active copper cables, while providing improved signal integrity, longer distances, superior electromagnetic immunity and better bit error rate performance.
10G SFP+
The 10G SFP+ series optical transceiver support up to 11.3Gb/s transmission rate, 220m to 100Km a variety of transmission distance, this series of optical transceiver use LC optical interface, with low power consumption, small size, high reliability, wide temperature range and other characteristics, mainly used in SDH/SONET/FC transmission environment.
FURNITURE CATEGORIES
SPECIAL OFFER
Arista
Cisco
Dell
+3
HPE Aruba
Intel
Juniper
PLC Splitter
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE and GR-1221-CORE requirements.
25G SFP28 AOC
The 25G SFP+ Active Optical Cable designed for use in 25G Ethernet links. This AOC is compliant with the SFP28 MSA IEEE 802.3by 25GBASE-SR standards. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
25G SFP28 DAC
Connlight 25G SFP28 PCC is a portfolio of passive Direct Attach Copper (DAC) cables as high-speed, cost-effective alternatives to fiber optics in 25G Ethernet applications. The 25G SFP28 PCC cable contains 2 high-speed copper pairs, operating at data rates of up to 25Gb/s. Each SFP28 port comprises an EEPROM providing product information, which can be read by the host system. Connlight's unique quality Passive Copper Cable (PCC) solutions provide power-efficient connectivity for short-distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers. Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.
1.25G DWDM SFP
Connlight 155M~ 2.67G CWDM&DWDM SFP contain 155Mb, 622Mb, 1.25Gb, 2.5G series, support a variety of transmission distance from 40KM to 160KM. The series products adopt LC optical port and are compatible with ieee 802.3ba.It is characterized by low power consumption, small volume and wide temperature range.It is mainly used in SDH/SONET transmission and other environments.
40G QSFP+ DAC
The 40G QSFP+ PCC is a portfolio of passive Direct Attach Copper (DAC) cables as high-speed, cost-effective alternatives to fiber optics in 40G Ethernet applications. The 40G QSFP+ PCC cable contains 8 high-speed copper pairs, each operating at data rates of up to 10Gb/s. Each QSFP+ port comprises an EEPROM providing product information, which can be read by the host system.
OUR BLOG
27
Aug
Exploring Atlanta’s modern homes
Vivamus enim sagittis aptent hac mi dui a per aptent suspendisse cras odio bibendum augue rhoncus laoreet dui praesent s...
27
Aug
Green interior design inspiration
A sed a risusat luctus esta anibh rhoncus hendrerit blandit nam rutrum sitmiad hac. Cras a vestibulum a varius adipiscin...
27
Aug
Collar brings back coffee brewing ritual
When it’s about controlling hundreds of articles, product pages for web shops, or user profiles in social networks, all
27
Aug
Reinterprets the classic bookshelf
Aliquet parturient scele risque scele risque nibh pretium parturient suspendisse platea sapien torquent feugiat parturie...